No products in the cart.
Roll over image to zoom in
Click to open expanded view
500 Litre Slimline Insulated Water Tank
£370.00 – £440.00
500 Litre Insulated Water Tank Specification
- Dimensions (mm) 870 x 650 x 1200 H
- Lid: 455 mm – 1.5” Outlet (other options available)
- UV Stabilized Closed-cell structure provides built-in vapour
- Insulation available in 13mm or 25mm thickness
- Thermal conductivity value 40°C 0.042 W/ (m • K) with minimum energy loss through low thermal conductivity
- Insulative foam finish
- WRAS Approved Polymer for drinking water storage
Does your project need to meet Fluid Category 5 regulations?
Please note: Tank sizes quoted are subject to a +/- 3% variation.
500 Litre Insulated Water Tank
Our 500 Litre Insulated Water Tank is made from WRAS approve polymer with an insulation jacket engineered to prevent condensation and effectively reduce thermal and energy loss. Insulated water tanks are designed for use where temperature regulation is key and for the prevention of overheating or freezing of liquids.
Insulated water tanks are often used in conjunction with in-tank heaters or coolers to reduce running costs. The Insulation is available as 13mm or 25mm thickness and the foam used is a more effective insulator than traditional tank jackets. More details on the Insulation Performance Information here
This insulated cold-water tank is a one-piece mould, seamless, rotationally moulded tank that guarantees strength, impacts resistance and durability. It is manufactured from MDPE medium density polyethene and UV stabilised for many years outside use.
500 Litre Insulated Water Tank uses
- Food Industry
- Water & Potable water storage tanks
- Beer, cider brewing and winemaking
- Chemical storage and supply tanks
- Agricultural and Industrial applications
- Dosing tanks
Insulated Drinking Water Tank
All drinking water tanks are manufactured from WRAS approved polymer (Water Regulations Advisory Scheme) and available in black, boat blue or natural.
Regulation 31 Approved Tanks
Our plastic water tanks manufactured from WRAS approved material are DWI approved and meet the specific requirements of Regulation 31. This ensures that water suppliers producing and distributing drinking water only use products that do not cause any detrimental effects on the safety or quality of the drinking water.
Fluid Category 5 Insulated Tanks
In many installations, potable drinking water tanks which are connected to the mains water supply will need to have a type of AB air gap to be fluid category 5 approved. More details on tank installations that come under this are available here.
Customisation of fittings & equipment mounting.
These insulated water tanks are available with tank modifications to suit your project. Liquid level sensor assemblies, fill pipes, PN16 and ANSI flanged connections, welded BSP outlet and sockets. Bolt down lid and side access hatch are available for access for cleaning, installation, and maintenance of water pumps.
Delivery of Your Insulated Water Tank
Our drinking water tanks are manufactured at our factory in Lincolnshire. Most plastic tanks, underground water tanks and rainwater tanks are stocked for collection or quick delivery throughout the UK.
We are available to deliver direct to the site for installers to save double handling of these tanks. In some cases where clients cannot offload the tank, we can offer Hiab deliveries which are priced upon request.
Our full range of rainwater harvesting tanks, car valeting, water butts, wastewater and tanks below ground is available here
How big is a 500 Litre Insulated Water Tank?
|Dimensions||870 x 700 mm|
|Standard Outlet||1.5″ Male BSP|
|Lid||455 mm dia lid|
|Dimensions||87 × 65 × 120 cm|