10,000 Litre Insulated CAT5 Type AB Air Gap Break Tank

Call For Price

Available

10,000 Litre Insulated CAT5 AB Air Gap Tank Specification

  • Dimensions: (mm) 2600dia x 2910 H
  • Lid 620mm
  • Supplied as standard with 2” outlet
  • Brim Full Volume – 10,857 Litres
  • Fitted with screened overflow and weir
  • WRAS approved polymer
  • Closed-cell structure provides built-in vapour barrier
  • Low maintenance and repair costs
  • Tank jacket UV resistant for outdoor use
  • Minimum energy loss through low thermal conductivity
  • 100% rust proof – UK manufactured
  • Guaranteed for 10 years
    Please note: Tank sizes quoted are subject to a +/- 3% variation
Clear

10,000 Litre Insulated CAT5 Type AB Air Gap Break Tank

The 10,000 Litre Type AB Air Gap Break Tank Cat 5 is fitted with 13mm or 25mm insulation and a Type AB-Air gap with weir overflow (Fluid 5), which is a non-mechanical backflow prevention arrangement of fittings in compliance with the Water Supply (Water Fittings) Regulations 1999 in England and Wales and the technically identical Scottish Water Byelaws 2004. The installation and use of cold water storage cisterns and sectional tanks connected to the public water supply must comply with these conditions.

These INS17222201CAT5 10,000 litre Category 5 Break Tank Insulated are made from rotationally moulded polyethene, fitted with a cowled overflow to prevent the ingress of light into the tank and a stainless steel mesh to prevent the ingress of debris into the tank. Larger weirs can be specially made for larger inlets.

This arrangement of fittings for compliance with the Water Supply (Water Fittings) Regulations 1999 in England and Wales and the technically identical Scottish Water Byelaws 2004. The installation and use of cold water storage cisterns and sectional tanks connected to the public water supply must comply with these conditions. This portable tank is WRAS (Water Regulations Advisory Scheme) approved, insulated options are available if required. This break tank is supplied with the screened overflow and weir installed to meet the requirements of WRAS Fluid Category 5 Break Tanks, also known as a Fluid Cat 5 break tank, Fluid Cat 5 tank and Fluid Cat 5 booster set tanks.

Additional information

Dimensions 260 × 260 × 291 cm
Insulation Thickness

13mm, 25mm

Capacity

Main Menu