Service Water Break Tank

Call for Price

Available

Service Water Break Tank

  • Fitted with screened overflow and weir
  • WRAS approved polymer
  • Available in black colour option
  • 100% rust proof
  • UK manufactured
  • Supplied from stock for fast delivery
  • Guaranteed for 10 years

Please note: Tank sizes quoted are subject to a +/- 3% variation

SKU: Service Water Break Tank Category:

Service Water Break Tank

Enduramaxx’s Service Water Break Tank are constructed from the MDPE polyethene which is UV stabilised.  This tank is a one-piece, seamless, rotationally moulded tank which guarantees strength, impacts resistance, durability, and many years of use.  This arrangement of fittings for compliance with the Water Supply (Water Fittings) Regulations 1999 in England and Wales and the technically identical Scottish Water Byelaws 2004.

Fitted with a Type AB-Air gap weir overflow for complying with the Water Supply (Water Fittings) Regulations 1999. The weir overflow (Fluid 5) which is non-mechanical backflow prevention for inlets up to 50mm. Many water authorities demand that water storage tanks connected to the mains water supply have suitable measures to protect the mains from contamination. The AB Airgap is designed to prevent the inlet to become submerged and stop the water within the tank from contaminating the mains water supply should there be a backflow pressure drop in the mains.

The cowled screened overflow to prevent the ingress of light into the tank and a stainless-steel mesh to prevent the debris getting into the tank.  Larger weirs can be specially made for larger inlets.  This break tank meets the requirements of WRAS Fluid Category 5 Break Tanks, also known as a Fluid Cat 5 break tank, Fluid Cat 5 tank and Fluid Cat 5 booster set tanks.

Potable Drinking Water Break Tank

Our Fluid CAT5 Type AB Air Gap Break Tanks are manufactured from WRAS (Water Regulations Advisory Scheme) approved polymer and are available in black, boat blue or natural.  These water tanks are DWI approved and meet the specific requirements of Regulation 31.

What Installations Need to Be Fluid Category 5?

Many installations potable drinking water tanks which are connected to the mains water supply will need to be fluid category 5 approved.  In some case, this tank will need to be insulated to prevent thermal gain and loss such as plant rooms and outside potable water storage.  More details for tank installations which come under this are available here

Equipment Mounting and Customisation

The Service Water Break Tank is available with tank modifications options to suit your installation.  Liquid level sensor assemblies, fill pipes, BSP threaded inlets, outlets, PN16 and ANSI flanges, welded sockets are available.

Additional information

Dimensions 190 × 190 × 420 cm
Capacity

Main Menu